Added clipboard manager and fix battery module on Polybar

i3/.config/i3/config

@@ -19,6 +19,10 @@ set $right l
 
 set $term 'alacritty'
 set $editor 'emacs'
+set $filemanager 'nemo'
+set $notification 'dunst'
+set $browser 'org.mozilla.firefox'
+set $clipboard 'diodon'
 
 # Define names for default workspaces for which we configure key bindings later on.
 # We use variables to avoid repeating the names in multiple places.
@@ -113,12 +117,13 @@ for_window [class="Webconsole"] floating enable
 for_window [class="Authy"] floating enable
 for_window [class="Termfloat"] floating enable, resize set 960 540
 for_window [class="Mpv"] floating enable, resize set 960 540
-for_window [class="Spotify"] floating enable, move scratchpad
+for_window [class="Spotify"] floating enable, resize set 1280 1024, move scratchpad
 
 # Workspaces
 assign [class="Emacs"] 1
 assign [class="firefox"] 2
 assign [class="Telegram"] 3
+assign [class="discord"] 3
 
 focus_follows_mouse no
 
@@ -151,10 +156,11 @@ mode "launcher" {
 }
 bindsym $mod+d mode "launcher"
 
+bindsym $mod+Shift+f exec "nemo"
 bindsym $mod+Shift+b exec "flatpak run org.mozilla.firefox"
 bindsym $mod+Shift+t exec "flatpak run org.telegram.desktop"
 bindsym Print exec flameshot gui
-# bindsym $mod+Shift+v exec xfce4-clipman-history
+bindsym $mod+Shift+v exec --no-startup-id $clipboard
 
 # Use pactl to adjust volume in PulseAudio.
 bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +5%
@@ -312,19 +318,21 @@ exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
 exec --no-startup-id nm-applet
 
 # Polkit Authentication agent
-exec --no-startup-id /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
+exec_always --no-startup-id /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
 
 ### Apply wallpaper
-exec_always feh --bg-scale ~/.config/i3/wallpaper.jpg
+exec_always --no-startup-id feh --bg-scale ~/.config/i3/wallpaper.jpg
 
 ### Run status bar
-exec_always ~/.config/polybar/launch.sh
+exec_always --no-startup-id ~/.config/polybar/launch.sh
 
 ### Run in background X11 compositor
-exec_always picom --config ~/.config/picom/picom.conf
+exec_always --no-startup-id picom --config ~/.config/picom/picom.conf
 
 ### Run in background notification daemon
-exec_always $notification
+exec_always --no-startup-id $notification
+
+exec --no-startup-id $clipboard
 
 ### Enable autolock
 exec_always xautolock -time 5 -locker ~/.config/i3/scripts/lockscreen.sh -detectsleep
@@ -334,3 +342,6 @@ exec flameshot
 
 ### Run my preferred editor
 exec $editor
+
+### Run my preferred browser
+exec flatpak run $browser

i3/.config/i3/scripts/poweroff.sh

@@ -1,13 +1,12 @@
 #!/bin/bash
 
-# Menu di power con rofi
-chosen=$(echo -e "⏻  Spegni\n  Riavvia\n  Logout\n  Sospendi\n  Iberna" | rofi -dmenu -p "Power Menu:" -theme-str 'window {width: 20%;}')
+chosen=$(echo -e "⏻  Shutdown\n  Restart\n  Logout\n  Suspend\n  Hibernate" | rofi -dmenu -p "Power Menu:" -theme-str 'window {width: 20%;}')
 
 case "$chosen" in
-    "⏻  Spegni") systemctl poweroff ;;
-    "  Riavvia") systemctl reboot ;;
+    "⏻  Shutdown") systemctl poweroff ;;
+    "  Restart") systemctl reboot ;;
     "  Logout") loginctl terminate-session $XDG_SESSION_ID ;;
-    "  Sospendi") systemctl suspend ;;
-    "  Iberna") systemctl hibernate ;;
+    "  Suspend") systemctl suspend ;;
+    "  Hibernate") systemctl hibernate ;;
     *) exit 0 ;;
 esac

i3/.config/polybar/config.ini

@@ -121,7 +121,7 @@ font-0 = "JetBrainsMono Nerd Font:size=12;2"
 ;   modules-right = ipc clock
 modules-left = xworkspaces
 modules-center =
-modules-right = spotify filesystem memory cpu pulseaudio backlight battery xkeyboard date systray
+modules-right = spotify filesystem memory cpu pulseaudio backlight battery0 battery1 xkeyboard date systray
 
 ; Value to be used to set the WM_NAME atom
 ; If the value is empty or undefined, the atom value

i3/.config/polybar/modules.ini

@@ -66,7 +66,7 @@ type = internal/memory
 interval = 2
 format-prefix = " "
 format-prefix-foreground = ${colors.teal}
-label = %percentage_used:2%%
+label = %gb_used%/%gb_total%
 
 [module/cpu]
 type = internal/cpu
@@ -100,7 +100,7 @@ date-alt = %Y-%m-%d %H:%M:%S
 label = %date%
 ;label-foreground = ${colors.blue}
 
-[module/battery]
+[module/battery0]
 type = internal/battery
 
 ; This is useful in case the battery never reports 100% charge
@@ -191,7 +191,135 @@ format-low-foreground = ${colors.red}
 ;   %percentage_raw%
 ;   %time%
 ;   %consumption% (shows current discharge rate in watts)
+; New in versinon 3.6.0
+; label-low = BATTERY LOW
+
+; Only applies if <ramp-capacity> is used
+ramp-capacity-0 = 
+ramp-capacity-1 = 
+ramp-capacity-2 = 
+ramp-capacity-3 = 
+ramp-capacity-4 = 
+
+; Only applies if <bar-capacity> is used
+bar-capacity-width = 10
+
+; Only applies if <animation-charging> is used
+animation-charging-0 = 
+animation-charging-1 = 
+animation-charging-2 = 
+animation-charging-3 = 
+animation-charging-4 = 
+; Framerate in milliseconds
+animation-charging-framerate = 750
+
+; Only applies if <animation-discharging> is used
+animation-discharging-0 = 
+animation-discharging-1 = 
+animation-discharging-2 = 
+animation-discharging-3 = 
+animation-discharging-4 = 
+; Framerate in milliseconds
+animation-discharging-framerate = 500
+
+; Only applies if <animation-low> is used
 ; New in version 3.6.0
+;animation-low-0 = !
+;animation-low-1 = 
+;animation-low-framerate = 200
+
+[module/battery1]
+type = internal/battery
+
+; This is useful in case the battery never reports 100% charge
+; Default: 100
+full-at = 100
+
+; format-low once this charge percentage is reached
+; Default: 10
+; New in version 3.6.0
+low-at = 20
+
+; Use the following command to list batteries and adapters:
+; $ ls -1 /sys/class/power_supply/
+battery = BAT1
+adapter = ADP1
+
+; If an inotify event haven't been reported in this many
+; seconds, manually poll for new values.
+;
+; Needed as a fallback for systems that don't report events
+; on sysfs/procfs.
+;
+; Disable polling by setting the interval to 0.
+;
+; Default: 5
+poll-interval = 5
+
+; see "man date" for details on how to format the time string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+; Default: %H:%M:%S
+time-format = %H:%M
+
+; Available tags:
+;   <label-charging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-charging>
+format-charging = <animation-charging>  <label-charging>
+animation-charging-foreground = ${colors.green}
+
+; Available tags:
+;   <label-discharging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-discharging>
+format-discharging = <ramp-capacity>  <label-discharging>
+ramp-capacity-foreground = ${colors.yellow}
+
+; Available tags:
+;   <label-full> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+format-full = <ramp-capacity>  <label-full>
+format-full-foreground = ${colors.green}
+
+; Format used when battery level drops to low-at
+; If not defined, format-discharging is used instead.
+; Available tags:
+;   <label-low>
+;   <animation-low>
+;   <bar-capacity>
+;   <ramp-capacity>
+; New in version 3.6.0
+format-low = <ramp-capacity> <label-low>
+format-low-foreground = ${colors.red}
+
+; Available tokens:
+;   %percentage% (default) - is set to 100 if full-at is reached
+;   %percentage_raw%
+;   %time%
+;   %consumption% (shows current charge rate in watts)
+;label-charging = Charging %percentage%%
+
+; Available tokens:
+;   %percentage% (default) - is set to 100 if full-at is reached
+;   %percentage_raw%
+;   %time%
+;   %consumption% (shows current discharge rate in watts)
+;label-discharging = Discharging %percentage%%
+
+; Available tokens:
+;   %percentage% (default) - is set to 100 if full-at is reached
+;   %percentage_raw%
+;label-full = Fully charged
+
+; Available tokens:
+;   %percentage% (default) - is set to 100 if full-at is reached
+;   %percentage_raw%
+;   %time%
+;   %consumption% (shows current discharge rate in watts)
+; New in versinon 3.6.0
 ; label-low = BATTERY LOW
 
 ; Only applies if <ramp-capacity> is used

i3/.config/polybar/scripts/battery_combo.sh

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+# Paths to battery capacity files
+battery0_capacity="/sys/class/power_supply/BAT0/capacity"
+battery1_capacity="/sys/class/power_supply/BAT1/capacity"
+
+# Check if the capacity files exist
+if [[ -f "$battery0_capacity" && -f "$battery1_capacity" ]]; then
+    # Read the battery percentages
+    battery0_charge=$(cat "$battery0_capacity")
+    battery1_charge=$(cat "$battery1_capacity")
+
+    # Calculate the average charge
+    average_charge=$(( (battery0_charge + battery1_charge) / 2 ))
+
+    # Print the average percentage
+    echo "$average_charge%"
+else
+    # If one of the files is missing, print an error
+    echo "Error: one or more battery capacity files not found."
+fi